Board & Batten {post 6} Angle cut at the baseboard

Hi all!  I had a recent question in the comments from Kelly asking for close up photos of how the batten meets the baseboard when I posted my Laundry Room board and batten project.  Since it was awhile ago, I had to go back and review the five posts on that project.  But I was confident that I would find the info, in order to link to the post in my reply to her comment…but I actually discovered that I never provided a picture of that particular part.  Huh!  Thanks for asking for that, Kelly, because that would be helpful!

So now I am correcting that oversight :)

If you read Post 1, you will see that I decided to go with 1/2″ thick batten because I didn’t like that the 3/4″ boards created more of an obvious cut-back where it meets the existing baseboard molding.

In Post 3, I show how I decided to slice off some of the batten so it met the baseboard–but I didn’t go the more popular route that other bloggers have gone, with a 45 degree cut.  I showed that 45 degree cut on the 3/4″ batten in post 1, but the 1/2″ board is not cut back at all in that post.  I only took off enough of the board, so that the cut sat on top of the baseboard already on the wall.

Here’s how it looks in close-ups on the wall and complete:

Batten angle close up

And also how it looks at standing height:

Batten meets baseboard

I remember being a little worried that the 1/2″ option would be thick enough, since many bloggers were using the 3/4″ option.  I have no regrets going with the 1/2″, and I prefer that the batten doesn’t stick out any farther than it does in this room.  I also like that everything is slightly smaller than the door moulding and the built-in cabinet face frame boards.

So there you go–thanks for asking for this info Kelly!

You may not look too closely at anything other than the batten in these pictures.  I need to freshen up the ding marks on the doorway with new paint.  And maybe eliminate a dust bunny…or two…or seven.  Truly, after showing some other messy areas in our house over the years, you’d think I’d be over any embarrassment, but it turns out that I’m not, lol!

Posts in this series:

Board & Batten {Post 1}

Board & Batten {Post 2}

Board & Batten {Post 3}

Board & Batten {Post 4}

Board & Batten {Post 5} The Reveal

Board & Batten {Post 6} Angle Cut at the Baseboard

About these ads

About Pink Toes and Power Tools

I'm a DIY girl with a blog. Trying to complete one project before I jump into the next one!

2 responses to “Board & Batten {post 6} Angle cut at the baseboard”

  1. billlattpa says :

    That’s a good solution when the base moulding has a cap on it.

  2. Louise says :

    Did you have to make any use of a planer? Your redesign looks superb! For those interested in making certain their wood pieces are cut perfectly check out this DeWALT D26500K 4mm 1050W Planer. Helped me majorly and is available at; http://www.caulfieldindustrial.com/dewalt-!174-cat.html

Thanks for taking the time to tell me what you think!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 638 other followers

%d bloggers like this: